EL60 Atex
Electric valving/devalving unit for cylinder valves in ATEX environments
Characteristics
The EL60-ATEX allows screwing and unscrewing operations on cylinder valves in environments where explosive atmospheres may be present, ensuring a compliant closing torque, a significant saving of time and drastically reducing physical effort and the possibility of injury. The EL60 ATEX is classified as "category 2", suitable for working in "classified zone 1" and is suitable for operation with gases belonging to group IIC, i.e. the acetylene group.
The unit consists of a cylinder locking group and a torque control group. Both can be installed on the wall, or on the self-supporting base (on request). It is also possible to complete the unit with one of the two protective bulkheads, for an additional level of safety.
Technical data
Clamp closure | from Ø 80 to Ø 320 mm |
Model | EL60 |
Catalog code | MZSE001 |
Voltage Frequency (VAC/HZ) | 400/50 three phase |
Power | 1.5 kW |
Maximum cylinder height (including valve) | 400 ÷ 1650 mm |
Tightening torque | 8-40 Kg*m |
Compressed air supply | 8÷10 bar |
Overall dimensions (LxWxH) | 2000x800x3960 mm |
Weight | 600 kg |
Standard components
Use and maintenance manual |
Insert holder key |
Inserts: type "A" - "C10" - "C12" for 30 and 32 mm key square |
Removable and height-adjustable support surface |
Accessories
Additional inserts for key insert holder for key frame between 14 and 48 mm |